1 Ch Wired Wall Switch-no radio

1 channel wall mounted switch, remote control for our standard non-radio motors (also used as output multiplier for multiple motor systems): ZWAVE instructions are here. Please note that this is a surface mount unit, intended for industrial applications such as warehouse and factory environments. If you need an elegant solution for a domestic application, please see our wireless wall remotes.

• control our DC shade and blind motors (12 or 24v) in parallel, up/down/stop buttons
• control our window and skylight openers
• easily control 6 to 10+ motors at once, depending on load
• 8 mA idle current (0.008 AMP)
• 10 AMP maximum current delivery
• can be powered from 12 to 36v DC
• jumper selectable operation: latched, momentary, and toggle.
• 4 pin home automation or parallel switch interface (up, down, stop, ground)
• Arduino compatible, drive this switch directly from GPIO digital pins
• Can also be driven by 1-wire GPIO (Maxim/Dallas Semi)
• size: Height: 4" (102 mm), Width: 2 3/8" (60mm), Depth: 1 3/16" (30 mm)

See more info in this article about controlling 12v electric window and skylight openers.