RollerTrol™ Z-Wave group control kit for G series motors. Use this ZWAVE shade and blind motor control kit with any Z-Wave hub, such as Vera, SmartThings, Wink, Homeseer, etc. It includes one Z-Wave Trigger Module and one RF Group Transmitter.
RollerTrol™ 1 channel Z-WAVE for remote control of a group of DC motors: blinds, shades, vents, valves and our window/skylight openers. Use with our 1 Ch Relay Interface Transmitter for Motors (DCG-1R-RFT).
RollerTrol™ 1 channel RF transmitter accepts relay closure to trigger UP/DOWN/STOP radio commands for relay control of series G radio motors. Use our ZWAVE trigger module, or any Zigbee, Bluetooth, Wifi (or other) relay trigger module for this transmitter.
Z-Wave PIR Motion Detector with Temperature Sensor. This infrared sensor detects motion and sends a Z-Wave signal when motion is detected. This trigger signal can subsequently activate other devices with preprogrammed tasks. It also transmits room temperature.
Z-Wave door/window magnetic switch closure detection, for doors and windows, with relay contact sensor. Use this to send a trigger signal to your Z-Wave hub, either by magnetic switch position or contact closure on a sperate circuit (both can be used simultaneously).
Z-Wave wireless smoke detectors send Z-Wave signal when smoke from any fire or smouldering material is detected. This trigger signal can then activate various other devices such as sprinklers and additional alarms.
Z-Wave tilt sensor detects angle changes of items that it is attached to (eg. garage door). It has an additional capability to detect contact closure from a relay or switch. Send a trigger signal to your Z-Wave hub when the angle of a door, window or other object is changed.
RollerTrol™ 2 channel series G RF relay receiver module for DC circuits. Can be used with any G series remote to add radio control ON/OFF to any DC device such as LEDs, fans, valves, etc.. Can be used with our ZWAVE and Wifi motor relay trigger modules.
Total $US 0.00