Here's an unobtrusive 12 volt electric remote control window opener starter kit for controlling windows, skylights and other items you would like to move with a motorized actuator, controlled by our multi-channel radio remotes that also control our roller shades and other devices (remote not included).
Here's an unobtrusive 12 volt electric window opener starter kit for controlling vents, windows, skylights and any other item you would like to move with a motorized actuator. Includes actuator (WT12v-NR), wired wall switch and 2 amp power supply.
Add-on actuator: this actuator can be added to our kits when you need to open more than 1 window or skylight. This is an unobtrusive 12 volt electric window opener for controlling vents, windows, skylights and anything else you would like to move. It can be controlled by a simple switch, or with our optional remote controls.
RollerTrol™ 1 channel RF transmitter accepts relay closure to trigger UP/DOWN/STOP radio commands for relay control of series G radio motors. Use our ZWAVE trigger module, or any Zigbee, Bluetooth, Wifi (or other) relay trigger module for this transmitter.
RollerTrol™ 1 channel Z-WAVE for remote control of a group of DC motors: blinds, shades, vents, valves and our window/skylight openers. Use with our 1 Ch Relay Interface Transmitter for Motors (DCG-1R-RFT).
RollerTrol™ 1 channel series G RF receiver for any DC motor. Can be used with any G series remote to add radio control to any 12v motor. Can be used with our ZWAVE and Wifi motor relay trigger modules.
RollerTrol™ 1 channel wired remote control for DC motors and our window/skylight openers. Control 6 to 10+ motors at once, load dependant. Operates on 12 to 36 VDC. Has a home automation (Arduino compatible) interface, and can be controlled by our any relay module (including our ZWAVE module).
RollerTrol™ Z-Wave group control kit for G series motors. Use this ZWAVE shade and blind motor control kit with any Z-Wave hub, such as Vera, SmartThings, Wink, Homeseer, etc. It includes one Z-Wave Trigger Module and one RF Group Transmitter.
RollerTrol™ 1 channel series G RF receiver for any DC motor (15 amp). Can be used with any G series remote to add radio control to any 12v motor. Can be used with our ZWAVE and Wifi motor relay trigger modules.
Total $US 0.00