RollerTrol™ 1 channel Z-WAVE for remote control of a group of DC motors: blinds, shades, vents, valves and our window/skylight openers. Use with our 1 Ch Relay Interface Transmitter for Motors (DCG-1R-RFT).
RollerTrol™ 1 channel wired remote control for DC motors and our window/skylight openers. Control 6 to 10+ motors at once, load dependant. Operates on 12 to 36 VDC. Has a home automation interface, and can be controlled by our any relay module (including our ZWAVE module). This unit is intended for...
RollerTrol™ 1 channel RF transmitter accepts relay closure to trigger UP/DOWN/STOP radio commands for relay control of series G radio motors. Use our ZWAVE trigger module, or any Zigbee, Bluetooth, Wifi (or other) relay trigger module for this transmitter.
RollerTrol™ 2 channel series G RF relay receiver module for DC circuits. Can be used with any G series remote to add radio control ON/OFF to any DC device such as LEDs, fans, valves, etc.. Can be used with our ZWAVE and Wifi motor relay trigger modules.
RollerTrol™ Z-Wave group control kit for G series motors. Use this ZWAVE shade and blind motor control kit with any Z-Wave hub, such as Vera, SmartThings, Wink, Homeseer, etc. It includes one Z-Wave Trigger Module and one RF Group Transmitter.
RollerTrol™ 1 channel series G RF receiver for any DC motor (15 amp). Can be used with any G series remote to add radio control to any 12v motor. Can be used with our ZWAVE and Wifi motor relay trigger modules.
Total $US 0.00