Z-Wave AC Outlet Switch
Z-Wave 100v to 240v AC On/Off switch with pass-through outlet. Plugs into standard 3 prong AC dual receptacle outlet (does not block other plug).
Categories
- Gift Certificates
- Custom Roller Shades and Blinds
- RV, MOTORHOME, TRAILER, & BOAT BLIND MOTORS
- DIY ROLLER BLIND Kits+ Single Units
- DIY WINDOW OPENER Kits+ Single Units
- DIY SKYLIGHT OPENER Kits+ Single Units
- SKYLIGHT SHADES & BOTTOM-UP BLINDS
- REMOTE CONTROLS
- COMMERCIAL VENTILATION Louvers
- Z-WAVE
- Home Automation
- Solar Systems
-
Accessories
- Power Supplies
-
LED Light Systems
- ♦ LED 12v Flexible Strip Lighting - Warm White
- ♦ LED 12v DC Bulb Replacement Lights - Warm White
- ♦ LED 12v Recessed Ceiling Pot Lights - Warm White
- ♦ LED 12v Swivel Flood Lights - Warm White
- ♦ LED 12v Dimmers, Switches, Controllers
- ♦ LED 12v Marine and RV Lighting Systems
- ♦ LED AC Bulb Replacement Lights - Warm White
- ♦ LED Flashlights
- Irrigation Equipment
Control a 110/120v light or appliance wirelessly using this Z-Wave® On/Off switch. Z-Wave is a two-way RF mesh networking technology used for home automation and security.
This device also acts as a signal repeater for the network, increasing range and eliminating dead spots in the system (Routing Slave). It also supports Frequently Listening Routing Slave (FLiRS).
This device can be operated remotely, using a Z-Wave controller, or directly, by pressing the switch on the device. It plugs into a standard NEMA 5-15 power outlet and includes both a Z-Wave controlled outlet and standard, unswitched outlet. It will not to block the other socket when plugged into a standard two-plug duplex wall outlet, so you end up with 2 unswitched sockets and one ZWAVE controlled socket.
Specifications:
- Protocol: Z-Wave Frequency 908.42 MHz
- Operating Range: Up to 100 feet line of sight
- Operating Temperature: +5 ~ 140°F (-15 ~ +60°C)
- Operating Voltage: 100 ~ 240 VAC
- Maximum Resistive Load: 1800W for 110/120 VAC
