1 Ch Wired Wall Switch-no radio

RollerTrol™ 1 channel wired remote control for DC motors and our window/skylight openers. Control 6 to 10+ motors at once, load dependant. Operates on 12 to 36 VDC. Has a home automation interface, and can be controlled by our any relay module (including our ZWAVE module). This unit is intended for industrial use.

More details

$US 89.00 tax excl.


Availability: in-stock

1 channel wall mounted switch, remote control for our standard non-radio motors (also used as output multiplier for multiple motor systems): ZWAVE instructions are here. Please note that this is a surface mount unit, intended for industrial applications such as warehouse and factory environments. If you need an elegant solution for a domestic application, please see our wireless wall remotes.

  • control our DC shade and blind motors (12 or 24v) in parallel, up/down/stop buttons
  • control our window and skylight openers
  • easily control 6 to 10+ motors at once, depending on load
  • 8 mA idle current (0.008 AMP)
  • 10 AMP maximum current delivery
  • can be powered from 12 to 36v DC
  • jumper selectable operation: latched, momentary, and toggle.
  • 4 pin home automation or parallel switch interface (up, down, stop, ground)
  • Arduino compatible, drive this switch directly from GPIO digital pins
  • Can also be driven by 1-wire GPIO (Maxim/Dallas Semi)
  • size: Height: 4" (102 mm), Width: 2 3/8" (60mm), Depth: 1 3/16" (30 mm)

See more info in this article about controlling 12v electric window and skylight openers.



No products

Shipping: $US 0.00
Total $US 0.00

Cart Check out