RollerTrol™ 2 channel series G RF relay receiver module for DC circuits. Can be used with any G series remote to add radio control ON/OFF to any DC device such as LEDs, fans, valves, etc.. Can be used with our ZWAVE and Wifi motor relay trigger modules.
Auto-off digital multimeter with audible continuity and short circuit testing - large LCD display. Measure AC/DC voltage, AC/DC current, resistance, capacitance, temperature, frequency, transistor gain.
Z-Wave PIR Motion Detector with Temperature Sensor. This infrared sensor detects motion and sends a Z-Wave signal when motion is detected. This trigger signal can subsequently activate other devices with preprogrammed tasks. It also transmits room temperature.
24 lb lift (11 Kg) lift when using 1.5" OD tube, radio with BUILT-IN RECHARGEABLE BATTERY (no wiring required). See our article series about how easy it is to use a Raspberry Pi as a home automation hub.
RollerTrol™ Light sensing motor controller detects lighting conditions and activates our G series radio equipped motors by remote control. Can be used for day time/night time operation or for extreme sun conditions.
Total $US 0.00