Blind Motor-external radio kit, 45lb lift, G Series

Our "MAXI" series G model: 12v, 45 lb lift (20 Kg) when using 2.5" Rollease style O.D. tube. see bracket detail and external radio instructions here.

• control type: includes external receiver. Use our multi-channel remotes and ZWAVE interfacing for Vera, Wink, SmartThings, and any other home automation system with external relay modules.
• See our article series about how easy it is to use our BroadLink phone app as a home automation controller.
• can use our AC/DC power supplies
• includes motor, receiver (DCG-3R-RFR), tube adapters and hanging brackets
• control type: switched polarity for reversal by radio control
• BLACK STRIPE is positive
• lift capacity with standard adapters: 45 lb lift (~20 Kg) with 2.5" O.D. tube
• torque: 10 Nm
• speed: 9 rpm
• nominal voltage: 12 v DC (safe for children and adults)
• current comsumption max: 3.7 A
• max turns in one direction: 30
• upper/lower limits: adjustable screw type on motor
• noise level: 38db
• net weight: 1.8 kg - 4 lb
• made for industry standard 2.5" Rollease® OD tubing: YES
• can use generic round tubing with smooth inside wall: YES
• minimum tube length: 28" (71 cm)
• maximum tube length: unlimited
• ingress protection: IP44
• duty cycle: 10 min
• tested life: 30,000+ cycles

PLEASE NOTE: Whether it is blind motors or window/skylight openers, you do not need to be concerned with high voltage shocks because these units are operated on a low voltage of 12v DC (no shock hazard), using an AC/DC power supply (or 12v DC battery). It is good practice to connect your AC line as close to the 12v DC motor as possible, and to keep the DC line as short as possible, using at least lamp cord (16 gauge) wire for the 12v DC line. You can also use your car battery to test them.