Currency
Welcome, Log in
-- Price: lowest first Price: highest first Product Name: A to Z Product Name: Z to A In-stock first Sort by
RollerTrol™ 1 channel wired remote control for DC motors and our window/skylight openers. Control 6 to 10+ motors at once, load dependant. Operates on 12 to 36 VDC. Has a home automation interface, and can be controlled by our any relay module (including our ZWAVE module). This unit is intended for...
RollerTrol™ 1 channel RF transmitter accepts relay closure to trigger UP/DOWN/STOP radio commands for relay control of series G radio motors. Use our ZWAVE trigger module, or any Zigbee, Bluetooth, Wifi (or other) relay trigger module for this transmitter.
RollerTrol™ 2 channel group control receiver module for DC ON/OFF circuits. Can be used with any G series remote to add radio control ON/OFF to any DC device such as our smart film, LEDs, fans, valves, etc. Can also be used with our ZWAVE group control kit.
RollerTrol™ 1 channel series G RF receiver for any DC motor (15 amp). Can be used with any G series remote to add radio control to any 12v motor. Can be used with our ZWAVE and Wifi motor relay trigger modules.
This blind control kit is a ZWAVE & WiFi single channel GROUP CONTROLLER for motorized blinds, window openers, and other devices with reversible motors. Whether you have 2 or 200 motors in the group, it will control all the motors in the group simultaneously. Each motor can have its own individual travel limits, with email or txt...
This unit controls 3 different relays with bi-stable or momentary switches. Bi-stable switching is the default, but it can be re-programmed with a Z-Wave hub for momentary toggle behavior. Relays are 2 x 15 amp, 1 x 20 amp.
No products
Shipping: $US 0.00 Total $US 0.00
Cart Check out
motor blind control screen remote tubular 12v zwave home roller