Currency
Welcome, Log in
-- Price: lowest first Price: highest first Product Name: A to Z Product Name: Z to A In-stock first Sort by
12 volt DC, 12 lb lift (5.5 Kg) using 1.5" O.D. tube, no radio. Often used for RV blind and shade REPLACEMENT or RETROFIT. Use with dash switches; see article with helpful tips from folks that have done it.
Double pole double throw reversing switch for DC motors (center off). Used to set travel limits on our RV non-radio motors, and to control motor forward/reverse direction. See our article with helpul tips from folks...
Wireless tire pressure monitoring system (TPMS) is a snap to install. Screw the transmitters onto the valve stem of each wheel, place the console on your dashboard and you're done! See TPMS article series...
12 volt DC, 12 lb lift (5.5 Kg) when using 1.5" O.D. tube. You can use our radio motors (and window/skylight openers) with Z-Wave when coupled with our Z-Wave Group Controller, or use our hand held and wall mount remotes.
5 channel hand held remote for G series, with holster
RollerTrol™ 15 channel remote with wall mount holster, for G series motors. Radio signal travels through walls, assign single motor to each dedicated channel, assign multiple motors to a single channel, operate channels individually or ALL simultaneously, use more than one remote from different locations, set travel...
5 channel wall mount remote, GQ series
No products
Shipping: $US 0.00 Total $US 0.00
Cart Check out
motor control blind screen tubular remote 12v home zwave roller