Currency
Welcome, Log in
DIY Kit for Projector Screens and Blinds. Kit includes: 1 motor (12 lb lift), mounting brackets, tube adapters, power supply, 5 ch remote (can be used with 12v external battery).
This blind control kit is a ZWAVE & WiFi single channel GROUP CONTROLLER for motorized blinds, window openers, and other devices with reversible motors. Whether you have 2 or 200 motors in the group, it will control all the motors in the group simultaneously. Each motor can have its own individual travel limits.
Universal zone valve kit includes the hardware required to set up a 12v switched irrigation control zone for garden, lawn, and greenhouse watering system (1/2" inlet/outlet).
These spring loaded wall mount brackets can be clipped into the TrackGlider track system anywhere you need support. To install, just pull back the plastic spring mechanism, clip it to the top of the I-Beam rail, then release the spring. Ceiling mount brackets are also available.
These spring loaded wall mount brackets can be clipped into the TrackGlider track system anywhere you need support. To install, just pull back the plastic spring mechanism, clip it to the top of the I-Beam rail, then release the spring. Wall mount brackets are also available.
The wheeled cars for the TrackGlider track system just slide onto the I-Beam end of the track. These are quiet, almost frictionless cars that carry the hooks normally fastened to drapes and curtains, but they can be used to drag anything along the track. Typical recommended usage is 3 per foot.
The end caps for the TrackGlider track system just slide onto the I-Beam end of the track and provide an anchor hole for the curtains, drapes or whatever you are using the track for.
Z-Wave PIR Motion Detector with Temperature Sensor. This infrared sensor detects motion and sends a Z-Wave signal when motion is detected. This trigger signal can subsequently activate other devices with preprogrammed tasks. It also transmits room temperature.
Z-Wave door/window magnetic switch closure detection, for doors and windows, with relay contact sensor. Use this to send a trigger signal to your Z-Wave hub, either by magnetic switch position or contact closure on a sperate circuit (both can be used simultaneously).
No products
Shipping: $US 0.00 Total $US 0.00
Cart Check out
motor control blind remote tubular screen 12v skylight home roller