DIY Mini-Blind Kit 2 - 12v DC Radio Motor+Battery

This mini-blind kit uses our radio equipped 12v DC motors (battery power and 5 channel remote provided) that utilize RF (Radio Frequency) for transmission of the remote control signal. A small antenna in the motor receives the control signal and an onboard microprocessor then uses the decoded signals to activate the motor.

Features:

• very affordable
• very easy to install
• robust, with a long life
• operation is very quiet
• compatible with 12v LED lighting systems.
• unobtrusive, without a visual impact on the room (can be covered).
• green, with very low power consumption
• adaptable, can be used with any type of corded mini-blind
• compatible with our extended internet remote control system for phones, tablets, PC
• ZWAVE group controller also available

The mini-blind kit comes with the 12v DC motor pre-mounted with spool and mounting brackets, which are easily screwed to an adjacent sill. It can also be hidden with a color matched cover (we don't provide this because every window is different).

If you can drill a hole and tighten a bolt, you can do this. Here are the instructions.

List of Contents:

• 1 x 25mm remote control 12v motor
• 1 x 5 ch remote control, compatible with our other radio motors & controllers
• 1 x winder spool (installed on motor)
• 1 x set mounting brackets
• 1 x 12v DC battery (re-charged with USB power supply, included)

Please note that if you need white cord, it is available by the foot.

Dimensions:

• Motor Overall Length: 14 inch (35 cm)
• Motor Overall Width (mounting bracket width): 3 inch x 3 inch (7.5 cm x 7.5 cm)
• Battery Overall Dimensions: 10 1/2" x 1 1/8" x 1 1/8" (267mm x 29mm x 29mm)
• Battery Mounting Brackets (slide on battery housing, see picture):
• Battery Mounting Brackets increase height by 1/4" (6mm), width by 3/8" (86mm)