Universal Motor Interface Control Kit

This extender kit includes 1 motor control interface (12 volt, 10 amp), 1 motor of choice, and is designed for use with any home automation system, such as Z-wave®, Zigbee®, Insteon®, Crestron® and Control4®. An example would be the Insteon EZIO 4 Input/2 Output Relay Controller.

Any home automation system that has dry contact output (ie relay capability) will work with our product. All it requires is 2 switch closures (i.e. relays) for FORWARD & REVERSE. The switch closures simply provide a path to ground on the 2 control wires, 1 for FORWARD, 1 for REVERSE.

A third relay could be used as a safety to control power to the system, shown as an external switch in the diagram (STOP), but setting both relays OFF will also stop the motor.

This will control one group of up to approximately 8 blinds, depending on sizes of motor selection; it works with any 12v power source that has an amperage rating suitable for your motor requirements.

You could also use a mechanical 'break before make' wall switch with this kit. Please see the universal controller detail page for more info.