Custom Roller Shade and Blind Packages
We are now offering high quality Mermet fabrics pre-mounted on standard tubing. Our motors will slide right into these tubes and lock in place. No fuss, no muss. See description below for the link.
Categories
- Gift Certificates
- Custom Roller Shades and Blinds
- RV, MOTORHOME, TRAILER, & BOAT BLIND MOTORS
- DIY ROLLER BLIND Kits+ Single Units
- DIY WINDOW OPENER Kits+ Single Units
- DIY SKYLIGHT OPENER Kits+ Single Units
- SKYLIGHT SHADES & BOTTOM-UP BLINDS
- REMOTE CONTROLS
- COMMERCIAL VENTILATION Louvers
- Z-WAVE
- Home Automation
- Solar Systems
-
Accessories
- Power Supplies
-
LED Light Systems
- ♦ LED 12v Flexible Strip Lighting - Warm White
- ♦ LED 12v DC Bulb Replacement Lights - Warm White
- ♦ LED 12v Recessed Ceiling Pot Lights - Warm White
- ♦ LED 12v Swivel Flood Lights - Warm White
- ♦ LED 12v Dimmers, Switches, Controllers
- ♦ LED 12v Marine and RV Lighting Systems
- ♦ LED AC Bulb Replacement Lights - Warm White
- ♦ LED Flashlights
- Irrigation Equipment
Our regular radio & non-radio motors are made for industry standard RollEase 1.5" tubing, but the rubber drive adapters can be trimmed to fit other sizes.
You can certainly do a DIY project with our motors and materials from any hardware supplier, such as Home Depot, but we are now offering Mermet fabrics (and others), pre-mounted on standard tubing, with hem bar.
Please visit our Custom Blind & Shade website for a package quote:
https://AutomaticBlindsAndShades.com
PLEASE NOTE: Whether it is blind motors or window/skylight openers, you do not need to be concerned with high voltage shocks because these units are operated on a low voltage of 12v DC (no shock hazard), using an AC/DC power supply (or 12v DC battery). It is good practice to connect your AC line as close to the 12v DC motor as possible, and to keep the DC line as short as possible, using at least lamp cord (16 gauge) wire for the 12v DC line. You can also use your car battery to test them.
