Author Topic: Use solar charger on multiple motors?  (Read 18517 times)

johank

  • Newbie
  • *
  • Posts: 2
    • View Profile
Use solar charger on multiple motors?
« on: February 15, 2013, 07:42:58 PM »
If I want to use a solar charger with TMDC-12-18-03-25-RMB, do I need one charge per motor, or can multiple motors be hooked to a single charger?

I have two large window banks made of 3 panels that total 10 ft wide and I want to put three individual blinds on each window and use as few chargers as possible.


admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 93
    • View Profile
    • RollerTrol Automation Systems
Re: Use solar charger on multiple motors?
« Reply #1 on: February 15, 2013, 07:51:27 PM »
Hi, you can certainly connect multiple motors in parallel with a single solar panel charger, but each time you do it, you divide the charging capacity between the number of motors. You could start with a single panel, then add more later if you don't get enough time between charges with the AC charger. It will depend a lot on how much sunlight you get on the solar panel.

Regards, Adrian

Adrian Biffen
Customer Service
RollerTrol Automation Systems
http://RollerTrol.com/


TheWaterHeart

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Use solar charger on multiple motors?
« Reply #2 on: September 23, 2014, 11:52:45 PM »

Great I was hoping this would come over from the old Wiki