Author Topic: Trouble with RFXCOM Receiving Remote Commands  (Read 15887 times)

Jonathan

  • Newbie
  • *
  • Posts: 1
    • View Profile
Trouble with RFXCOM Receiving Remote Commands
« on: August 04, 2015, 07:26:28 AM »
Hi... I've recently purchased several wireless blind motors (TMDC-12-25-11-25-RB), have installed them, and paired them to one of the 15-channel remotes, grouped some, etc, and now I'm trying to get them to work with my RFXCOM device - right now just manually via the RFXmngr application - I'll work on integrating my automation platform later.

I have the RFXtrx433E and have followed Adrian's steps outlined in the forum post below.  I followed all steps successfully, but the rfxcom didn't show anything happening when I pressed buttons on the remote control.

The box works, I can enable other commands and hear signals from my weather station, but nothing when on Blind T0.

Any guidance would be greatly appreciated.  Thanks!

http://forum.micasaverde.com/index.php?topic=31372.0

admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 92
    • View Profile
    • RollerTrol Automation Systems
Re: Trouble with RFXCOM Receiving Remote Commands
« Reply #1 on: August 04, 2015, 09:11:28 AM »
Hi Jonathan, thanks for your inquiry.

Could you please contact me directly by email, I need to go over your order to determine the exact type of equipment you have.

Regards, Adrian

Adrian Biffen
Customer Service
RollerTrol Automation Systems
http://RollerTrol.com