Shade & Blind Motors: RollerTrol Community Forum

What is the best home automation system? => Choosing a home automation system => Topic started by: sbe08 on September 03, 2012, 08:24:05 PM

Title: RollerTrol, RFXtrx & Indigo
Post by: sbe08 on September 03, 2012, 08:24:05 PM

Hello Adrian,

I'm in the process of integrating a few motors with integrated radios and I'm having some issues because the RFXtrx plug-in that ships with Perceptive Automation's Indigo on the Mac has no support for the BlindT0 protocol. I'm quite rusted as for as writing code goes, but I would give it a try, especially if I could have access to your Vera plug-in implementation. Is that something that you can share?

Thanks,

Sylvain

Title: Re: RollerTrol, RFXtrx & Indigo
Post by: admin on September 03, 2012, 08:41:11 PM

Hi Sylvain, thanks for your continued interest.

The Vera plugin for our blind and shade motors was written by a very clever member of the Vera forum. It is freely available, so you should have no problem downloading it. Here is the article:

http://forum.micasaverde.com/index.php/topic,9563.0.html

If all else fails, we do have the RFXCOM USB transceivers in stock:

http://rollertrol.com/store/en/vera-home-automation-control/96-rfxcom-usb-transceiver.html

If I can be of further assistance, please contact me anytime.

Regards, Adrian

Adrian Biffen
Customer Service
RollerTrol Automation Systems
http://RollerTrol.com/

Title: Re: RollerTrol, RFXtrx & Indigo
Post by: sbe08 on September 06, 2012, 09:39:14 PM

Thanks Adrian. It seems that Robert will add support for the BlindT0 protocol in his RFXCOM plug-in for Indigo. You can follow his progress here:

http://www.perceptiveautomation.com/userforum/viewtopic.php?f=28&t=8808 (http://www.perceptiveautomation.com/userforum/viewtopic.php?f=28&t=8808)

Sylvain