Connecting Motors & General Wiring Issues > Voltage, polarity, wire size, etc.
Use solar charger on multiple motors?
(1/1)
johank:
If I want to use a solar charger with TMDC-12-18-03-25-RMB, do I need one charge per motor, or can multiple motors be hooked to a single charger?
I have two large window banks made of 3 panels that total 10 ft wide and I want to put three individual blinds on each window and use as few chargers as possible.
admin:
Hi, you can certainly connect multiple motors in parallel with a single solar panel charger, but each time you do it, you divide the charging capacity between the number of motors. You could start with a single panel, then add more later if you don't get enough time between charges with the AC charger. It will depend a lot on how much sunlight you get on the solar panel.
Regards, Adrian
Adrian Biffen
Customer Service
RollerTrol Automation Systems
http://RollerTrol.com/
TheWaterHeart:
Great I was hoping this would come over from the old Wiki
Navigation
[0] Message Index
Go to full version