FAQ: Are your shade and blind motors suitable for Churches?
Our remote control motors are very suitable for use in Churches and any place of worship where people gather, such as Synagogues, Cathedrals, Mosques and Temples.
Windows in these buildings are often very tall and require motors like ours that allow for unlimited blind and shade lengths. Older tubular motor designs use mechanical limit switches that restrict the length of shades and blinds. Our motors use built-in electronic pulse counters that allow for unlimited length on very tall windows.
You do not need to be an electrician to install our DIY 12v motors, and the low voltage DC is safe for children and adults.
Sun shades can also be installed with a dual roller system so that you can select different shade material, depending on light conditions and time of day. For example, you could switch between translucent and blackout blinds.
Our radio equipped motors use RF (Radio Frequency) signals for transmission of the remote control commands. A small antenna in the motor receives the control signal and on-board circuitry decodes the command and activates the motor.
This system is different from the infrared signal used on most television sets. The RF signal is not directional, so you do not have to point the remote at the roller shade or blind, and it is also capable of passing through walls, reaching almost anywhere inside a typical Church. Our multi-channel remotes can be programmed to control sun shade motors in various different rooms and hallways throughout the building.
Please see our online store for fast delivery: sun shade motors and accessories
We sincerely hope you enjoy using these advanced light systems and motors; if you have any questions, please feel free to contact us at any time!