Welcome, Log in

x10 Relay Module

x10 remote control relay module - 5 Amp

Set the house and unit codes for it to respond for remote on/off control.
Also responds to ALL UNITS OFF commands.
Isolated relay actuates anything triggered by a contact closure.
Relay switches a voltage applied to its terminals such as 12 volt motors, solenoids, low voltage lighting, etc.
Can be set for momentary (2 seconds) or sustained contact closure.
Annunciator can be set to sound a series of beeps with no relay contact closure, beeps with
relay contact closure, or silent relay contact closure.
Measurement in inches: (L W D) 3.5 x 2.25 x 1.5
Local ON and OFF buttons right on the module.
Contacts are rated at 5A at 24 VDC or 100VA at 30 VAC.
Module is UL listed and CSA approved. 120 Volts AC 60Hz 1 Watt. Color is white
Compatible with X10 products including those from GE, IBM, Leviton, Magnavox, RCA, Radio Shack, Safety First, Stanley.