Kit 4: Z-Wave Window/Skylight Opener

Here's an adjustable stroke, unobtrusive Z-Wave only 12 volt electric remote control window opener kit for controlling windows, skylights and other items you would like to move with a motorized actuator. It cannot have additional actuators added to it, this kit is designed for discrete, individual control. Please see Kit 3 for Z-Wave GROUP control.

More details

$US 259.00 tax excl.


Availability: available

You've seen how handy our window blind and shade systems are, now you can use Z-Wave to open and close your windows. These units are designed for individual control by Z-Wave only; they cannot be controlled by our wall or hand held remotes, or WiFi app, or the BroadLink hub.

If you need to control a group of actuators with Z-Wave, please see kit 3 as it may be a better choice for your application.

Please contact our sales support for a quick quote.

It is simple to adapt this actuator unit to most types of windows and skylights with the provided mounting brackets.

The flex link direct push stroke is also adjustable: 4" (100mm), 8" (200mm), 10" (250mm), 12" (300mm).

The opening/closing force before obstruction is sensed is approximately 20 lbs (9 kg), current consumption is ~1.5 A, protection class is IP32. These units have been stress tested to over 3,000 openings.

If you are planning to use this for a skylight opener, note that you can check the force required to open the skylight by standing on a bathroom scale and pushing up on the skylight with a long broom handle or other suitable pole. If your skylight is heavier than the actuator capacity, you can offset the extra weight with gas shocks, torsion springs or external counterweights.

PLEASE NOTE: Window and skylight openers can be dangerous to children and adults as they normally have a considerable amount of force that is used to draw the window closed and provide security. There is more than enough force to crush fingers of small children and/or cause injury to adults, pets, or other animals. If you need to motorize a window, skylight or other object where there is a potential danger because the motor is within normal reach, you should consider taking steps to screen the window.

Dimensions (WT12v-NR):

Length: 38.2 cm (15 1/16")

Sill Width: 50mm (2.0")

Sill Width including chain nose: 76mm (3")

Height: 34mm (1 3/8")

The linear chain actuator pushes straight out from the fixed housing which lines up unobtrusively with your window frame, fastened in place with mounting screws.

Includes actuator (WT12v-NR), a 12v Z-Wave receiver, and a 12v AC/DC power supply.

Use it to control the motion of anything you want, including windows, greenhouse vents, skylights, etc. Powered by 12v DC, it works great with solar and 12v battery sytems too.

 The stroke is also adjustable: 4" (100mm), 8" (200mm), 10" (250mm), 12" (300mm)



No products

Shipping: $US 0.00
Total $US 0.00

Cart Check out