Anchor Light Kit for Boats with Day/Night Light Sensor

This unit has a UV and impact resistant plastic housing and lens. The very bright LED lamp easily exceeds the Coast Guard standard of 2 nautical miles, yet it only consumes a mere 2.4 watts (200 mA). The wires go directly through the base, so you just need to drill a small hole and mount it with the 2 screws. The LED lamp also has a built in constant-current driver to maintain a very long service life, and can be used with a dimmer (see accessories).

The marine grade day/night anchor light sensor switch is sealed in an epoxy filled housing and is impervious to weather and salt corrosion. It has an extremely low standby draw of 0.00015 A and a high power handling capability (200 watts) that can be used to power other devices. It comes with easy screw terminals and can also be purchased separately (see accessories)

Day/Night light sensor features:

• extremely low standby consumption: 0.00015 A (0.15 mA)
• sealed epoxy casing, fully waterproof
• very small, 1" x 1" x 1"
• high capacity: handles up to 120 watts (10 a) @ 12v DC
• use with relay for heavier loads
• works with LED, incandescent, or fluorescent
• fixed light sensitivity threshold
• simple to connect
• on/off indicator status light