Author Topic: Roller shade motors - Same speed in different sizes?  (Read 10699 times)

bryblind

  • Newbie
  • *
  • Posts: 3
    • View Profile
Roller shade motors - Same speed in different sizes?
« on: August 08, 2018, 12:56:05 AM »
I have some Rollease 1.5" tubes adjacent to 1" tubes.  If I mix and match motors, will they roll/unroll the shades at the same rate?

TMDG-12-25-16-40-RB
TMDG-12-16-03-50-RB

Thanks!

admin

  • Administrator
  • Hero Member
  • *****
  • Posts: 92
    • View Profile
    • RollerTrol Automation Systems
Re: Roller shade motors - Same speed in different sizes?
« Reply #1 on: August 08, 2018, 07:51:06 AM »
Hello, thanks for your interest.

The shade delpoyment speed is determined by several factors, such as motor design, tube diameter, and weight of shade. It is unlikely that your arrangement would result in the same speed of delployment, but you will be able to program the travel limits so that they always end up in the same place.

You can compare the speed of motor types in our cart, but please keep in mind the tube diameter also plays a signifigant role:

http://rollertrol.com/store/en/5-tubular-motors

Regards, Adrian

Hawkin

  • Newbie
  • *
  • Posts: 1
    • View Profile
Re: Roller shade motors - Same speed in different sizes?
« Reply #2 on: February 09, 2019, 03:56:25 AM »
Hello, thanks for checking out these top weight loss shakes and your interest.

The shade delpoyment speed is determined by several factors, such as motor design, tube diameter, and weight of shade. It is unlikely that your arrangement would result in the same speed of delployment, but you will be able to program the travel limits so that they always end up in the same place.

You can compare the speed of motor types in our cart, but please keep in mind the tube diameter also plays a signifigant role:

http://rollertrol.com/store/en/5-tubular-motors

Regards, Adrian

Did you actually experiment with this at all, Bryblind? I'd love to hear about your experiences.
« Last Edit: August 26, 2023, 12:46:02 PM by Hawkin »

bryblind

  • Newbie
  • *
  • Posts: 3
    • View Profile
Re: Roller shade motors - Same speed in different sizes?
« Reply #3 on: February 09, 2019, 11:48:12 AM »
Yes. The speeds are adjustable and I was able to get it close enough.