Shade & Blind Motors: RollerTrol Community Forum
Programming Motors => Pairing remotes to motors and assigning channels => Topic started by: tecbuilt on June 06, 2016, 08:44:11 PM
-
I have MCD shades and nobody sells the parts online like Rollertrol (you have to go through a dealer). I bought a 2 channel remote from Rollertrol hoping it would work with my MCD motor since all the parts look exactly the same but I can't get it to pair. Is there a difference in the protocol? I would be willing to send one of my MCD 2 channel remotes and the 2 channel remote I bought from Rollertrol to somebody that has the equipment to analyze the RF. I would really like the parts to be compatible because I get tired of calling dealers and leaving a message and nobody calls me back or I get passed to several people because they don't know what exactly I need.
-
Good Morning @tecbuilt, thanks for your interest.
Our protocol won't work with MCD, you would need to change the motor too.
If you want to mess with analyzing protocols, please take a look at Stefan's method via our Raspberry Pi article about his OpenNetHome System, there's a link to it on his website:
http://RollerTrol.com/raspberry-pi-shade-blind-motor-control-part1
Regards, Adrian
-
So are you saying it would be possible to control the MCD shades with a Raspberry Pi and a transmitter like the JeeLink Classic? Do you know of anyone else that has done that?
-
Hi @tecbuilt, it would be a very complex process, even for a software engineer, although it is theoretically possible. It's not something we could tackle, sorry.
Regards, Adrian